WMS - Configure DHCP for Pricing Stations

Owned by Scott Erickson
Jul 07, 2022
1 min read

You will need to configure static Host entries for the pricing stations, setting the name to 001Pricing2 where ‘001’ is the Store ID, and '2' is the pricing station number. This name is what makes the autologin work properly

You will need to configure special DHCP options for the Wyse pricing stations.

It is expected that each store will have its own DHCP server.

For the Dell Wyse Thin Clients, not only must static IP addresses be assigned, but these extra DHCP options must be set:

ID

Type

Name

Value

ID

Type

Name

Value

165

String/ASCII

wms-ccm-server

FQHN/IP address of the WMS Server

166

String/ASCII

wmc-ccm-mqtt-server

FQHN/IP address of the WMS server

167

String/ASCII

wmc-ccm-ca-validation

The string “False” without the quotes.

199

String/ASCII

wmc-ccm-group-key

This is the key for the WMS configuration group. This will be something like “defa-xxxxxxxx”. This is set in the WMS configuration page.

NOTE: all of these are ASCII/String fields. Even the IP addresses are Strings.